Mint NextMove PCI Bedienungsanleitung PDF herunterladen (Seite 37)

24 Input, 24 Output Module

• 24 outputs are opto isolated and protected against

over-current and over-temperature.

• 50mA continuous source on all channels.

• 350mA max source on all channels.

• 500mA max total output for all 8 channels.

• 24 inputs are opto isolated and may be connected

to positive or negative common (for use with NPN

and PNP output transistors).

• Inputs are guaranteed to be active in the range

±12V to ±24V and inactive between ±2V.

• Power requirements: Voltage range: 12-30V,

Current range, 12V (369mA) & 24V (267mA) all

inputs and outputs on.

Operator Panel

A full featured Baldor operator panel can connect

directly into the CAN-2 expansion port. The panel

provides a cost effective and flexible means for

inputting and displaying operator information.

MINT™ provides a powerful set of functions for

reading from and writing to the panel, allowing a

variety of operator interface types to be configured.

INPUT waits for a number to be entered, INKEY

reads the next key in the serial buffer and READKEY

reads the key currently being pressed. CLS clears the

screen and LOCATE locates the cursor at a specified

location. Function key F1 through F6 are designed to

support menu driven applications.

Specifications:

• 20 character by 4 line backlit LCD display.

• 3 axes model: total of 27 keys, X, Y, Z cursor keys,

numeric keypad and 6 user definable function keys.

• 4 axes model: total of 41 keys, axis 1, 2, 3, 4,

cursor keys, numeric keypad and 18 user definable

function keys

• Tactile feedback on all keys.

• Audible buzzer controlled from software BEEP

command.

• Connected to NextMove PC controller via CAN.

• Maximum cable -500m/1600ft, shielded twisted

pair.

• Power supply: +15 to 24V (135mA).

• 19" rack compatible – 3U by 42HP

• Four screw studs mounted on rear of panel provide

secure mounting to any flat panels.

Expansion Cards

NextMove PCI can support a maximum of four

servo/vectors and four steppers in a single card

configuration. By adding an expansion card it is

possible to increase the number of controlled axes up

to a maximum of twelve with two expansion cards.

Each card occupies a single PCI card slot and is

connected to the main controller card using a

bridging connector fitted across adjacent cards.

Expansion cards take power from the PCI bus. All

external signals are brought out on a 100 way

connector which has a pin configuration identical to

that of the NextMove PCI. This allows the same

breakout unit and cable types to be used.

Two different types of expansion card are available. A

four axes card in which each axis may be configured

as a servo or stepper, and an eight axis card which

features four axes of servo and four axes of stepper.

Developers Kit

The developers kit provides a quick and cost effective

way of designing NextMove PCI into your application.

It includes an eight axes controller, together with all the

necessary accessories and software to get your

system moving. In addition one of each type of output

driver module and CAN interface module are included

to allow complete evaluation of the available options.

8.38"/213mm

ION004-501

KPD002-501

8.66"/220mm

9.56"/243mm

KPD002-505

PCI 002-501 or PCI 002-502

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Mint NextMove PCI Bedienungsanleitung Seite 37

Kommentare zu diesen Handbüchern